Home > Products > Screw Removal > DBZ-62
DBZ-62 Hexagon Socket Screw Extractor
Extractor bit set for broken screws including but not confined to hex
socket and Phillips heads!
-
Works with 2.0mm (Across Flats) stripped hex socket of cap bolt,
countersunk or button head -
Used manually with 6.35 driver handle or with a power screwdriver
-
Sharp & fine-pitch spiral tip grips a hex socket without slippage.
-
Also useful as an extractor for other screw drives such as Phillips, Torx, etc. if
an electric drill is used to make a pilot hole (The process described below.) -
Bit size : 105mm x Hex. 6.35mm
-
Material : High carbon steel
Video
Application to Socket Screws
Application to Phillips & other drives
-
Press the extractor bit into the stripped socket.
-
Twist it out while keeping the bit pressed firmly.
When using a power screwdriver, select slower speed in reverse mode and spin it counterclockwise.
-
Drill a pilot hole in the center of screw head.
-
Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used).
-
Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power screwdriver can be also used. (slower speed recommended)
Related products
4-in-1 Socket Screw Extractor Set
(DBZ-20)
Cross Section
Go-through Driver Handle
with 13mm Hex Bolster
(DZ-70)
ø38 x 121(L) mm
Hex. Screw Extractors
[Strike & Turn type]
for Heavily-damaged Hex. Socket
(DBZ-53/54/56)
* 65mm-long middle size for Hexagon socket screw, cap bolt, Hex. socket set screw, etc.
* Stepped shaft for work in a narrow space
DR-22 100mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 & DBZ-410~450 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
DR-25 99mm
* DBZ-51~65 & DBZ-410~450 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.