top of page

 DBZ-20  4-in-1 Socket Screw Extractor Set

Extractor bit set for damaged screws including but not confined to hex socket and Phillips heads!
  • Works with 2~5mm (Across Flats) stripped hex socket of cap bolt, countersunk or button head

  • Used manually with 6.35 driver handle or with a power screwdriver

  • Sharp & fine-pitch spiral tip grips a hex socket without slippage.

  • Also useful as an extractor for other screw drives such as Phillips, Torx, etc. if an electric drill is used to make a pilot hole (The process described below.)

  • Comes with a plastic carrying case

  • Bit size : 105mm x Hex. 6.35mm

  • Material : High carbon steel

                              Where to Buy                              

Video
Video
Features
Application to Socket Screws
Application to Phillips & other drives
DBZ20_AP01.jpg
DBZ20_AP04.jpg
  1. Press the extractor bit into the stripped socket.

  2. Twist it out while keeping the bit pressed firmly.  
    When using a power screwdriver, select slower speed in reverse mode and spin it counterclockwise.

DBZ20_AP02.jpg
DBZ20_AP03.jpg
  1. Drill a pilot hole in the center of screw head.

  2. Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used).

  3. Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power screwdriver can be also used. (slower speed recommended)

Related products
Related
dbz50b.jpg

High-torque Handle Grip for DBZ series (Black)

(DBZ-50B)
100mm in width

dz70body.jpg

Go-through Driver Handle
with 13mm Hex Bolster
(DZ-70)
ø38 x 121(L) mm

oprepbits.png
Specs
Specifications
bottom of page