top of page

 DZ-84  Socket Screw Extractor Set with Mini Handle 

65mm-long Socket Screw Extractors with Mini Handle Grip, ideal for
work in a limited space

  • Ideal for the extraction of the stripped or broken Hexagon Socket screws and
    Hex. Hollow Set screws

  • 7-in-1 Extractor Bit Set. Bit size : 65mm x Hex. 6.35mm 

  • Comes with 82mm compact handle grip with 13mm hex. bolster and rotary
    cap

  • Attachable to Extension Bit Holders (Option)

BUY NOW.jpg
DE.jpg
amazon.jpg
JP.jpg
amazon.jpg
Video
Video
Features
Features
Accessible to a screw in the deep hole
dbz400Series_10-2.PNG
Works with Hex. Socket Set Screws.
Combination with other attached parts (Optional)
Screw in the depth of the lengthy hole
Screw in the corner or the wall
Size / Compatible screw
Tip Shape
Spec.
dbz400Series_29-2.png

Power tool

Select Low Speed mode and press
the power screwdriver forward.
When you remove a larger screw
(M6) that requires high torque,
it is recommended to use the
extractor manually instead of a
power tool.

Application to Phillips & other drives

Step 1

Drill a pilot hole in the center of screw head.

Step 2

Apply the tip of the extractor and spin it

counterclockwise.

Select the appropriate size which corresponds to the pilot hole
(the diameter of the drill used).

Approximate cutting depth

Drill diameter

Dig with a drill to
the bottom of
the screw recess.

Excessive drilling
may snap off the
screw head.

CAUTION

Related
Related products

Compatibility Chart of Socket Screw Extractors

Socket Screw Extractor 18mm Bits (DBZ-310~350)

Socket Screw Extractor 18mm Bits

(DBZ-310~350)

Hex. Screw Extractors [Strike & Turn type] for Heavily-damaged Hex. Socket (DBZ-53/54/56)

Hex. Screw Extractors
[Strike & Turn type]

for Heavily-damaged Hex. Socket
(DBZ-53/54/56)

High-torque Handle Grip for DBZ series (DBZ-50B) 100mm in width

High-torque Handle Grip for DBZ series

(DBZ-50B)
100mm in width

Go-through Driver Handle ø38 x 121(L) mm with 13mm Hex Bolster (DZ-70)
Go-through Driver Handle ø38 x 121(L) mm with 13mm Hex Bolster (DZ-70)

Cross Section

Go-through Driver Handle ø38 x 121(L) mm
with 13mm Hex Bolster
(DZ-70)

Go-through Driver Handle ø38 x 121(L) mm  with 13mm Hex Bolster and DBZ-51 Extractor Bit (DZ-71)

Go-through Driver Handle ø38 x 121(L) mm 
with 13mm Hex Bolster and DBZ-51 Extractor Bit
(DZ-71)

Extension Bit Holder

Extension Bit Holder(DR-22.23.24)

DR-22     100mm

DR-23     150mm

DR-24     190mm

* DBZ-51~65 Extractors attachable
* The bit holder can be used with an Impact Driver, too.

Swing type Universal Joint

Swing type Universal Joint(DR-25)
Hex. 6.35.jpg

DR-25     99mm

Slide the sleeve forward to swing the tip to 15 degrees max.(DR-25)
Slide the sleeve forward to swing the tip to 15 degrees max.(DR-25)

* DBZ-51~65 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.

bottom of page