top of page

 DBZ-51  Extractor Bit for Phillips Screws

Time-saving rapid removal!  Designed for stripped Phillips screws
  • Elaborately Crafted Blades catch the stripped Phillips screw

  • DBZ-51 for Phillips #2 screw requires no hammer. Simply press down
    on the screw & twist it out!!

  • Shank Size : Hex. 6.35mm

BUY NOW.jpg
US.jpg
amazon.jpg
DE.jpg
amazon.jpg
TW.jpg
PChome.jpg
JP.jpg
amazon.jpg
Video
Video
Features
Features

Ordinary Screwdriver

Rapid Screw Extractor

Features.png
Slightly-damaged.gif
How to use
Press & Twist

Press & Twist type  (for slightly damaged screws) 

1) Insert the bit into the handle grip.

2) Place the bit tip into the screw head, then scrape away
     burs in the recess by twisting it back and forth lightly.  
     *Do not attempt to hit the bit with a hammer.

3) After you feel the bit tip catches the corner of recess, 
     give a jerk counterclockwise while pressing firmly 
     downward.

Related products
Related
Rapid Screw Extractor DBZ-60G

Rapid Screw Extractor
Handle Grip with DBZ-51/52 bits

(DBZ-60G)

dbz50b.jpg

High-torque Handle Grip for DBZ series

(DBZ-50B)
100mm in width

dz70body.jpg

Cross Section

Go-through Driver Handle ø38 x 121(L) mm
with 13mm Hex Bolster
(DZ-70)

DZ-71.jpg

Go-through Driver Handle ø38 x 121(L) mm 
with 13mm Hex Bolster and DBZ-51 Extractor Bit
(DZ-71)

DR-22     100mm

DR-23     150mm

DR-24     190mm

* DBZ-51~65 Extractors attachable
* The bit holder can be used with an Impact Driver, too.

Hex. 6.35.jpg

DR-25     99mm

* DBZ-51~65 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.

Specifications
Specs
bottom of page