Home > Products > Screw Removal > DBZ-420
DBZ-420 Socket Screw Extractor - 65mm Bits -
65mm-long Socket Screw Extractors, ideal for work in a limited
space. Hex socket size 2.0mm (Across Flats)
-
Ideal for the extraction of the stripped or broken Hexagon Socket screws and
Hex. Hollow Set screws -
Overall length 65mm
-
Used manually with 6.35 driver handle or with a power screwdriver
-
Attachable to Extension Bit Holders (Option)
Video
Features
Accessible to a screw in the deep hole
Works with Hex. Socket Set Screws.
Combination with other attached parts (Optional)
Screw in the depth of the lengthy hole
Screw in the corner or the wall
Size / Compatible screw
Tip Shape
Power tool
Select Low Speed mode and press
the power screwdriver forward.
When you remove a larger screw
(M6) that requires high torque,
it is recommended to use the
extractor manually instead of a
power tool.
Application to Phillips & other drives
Step 1
Drill a pilot hole in the center of screw head.
Step 2
Apply the tip of the extractor and spin it
counterclockwise.
Select the appropriate size which corresponds to the pilot hole
(the diameter of the drill used).
Approximate cutting depth
Drill diameter
Dig with a drill to
the bottom of
the screw recess.
Excessive drilling
may snap off the
screw head.
CAUTION
Related products
Socket Screw Extractor 18mm Bits
(DBZ-310~350)
4-in-1 Socket Screw Extractor Set
(DBZ-20)
Hex. Screw Extractors
[Strike & Turn type]
for Heavily-damaged Hex. Socket
(DBZ-53/54/56)
High-torque Handle Grip for DBZ series
(DBZ-50B)
100mm in width
Go-through Driver Handle ø38 x 121(L) mm
with 13mm Hex Bolster and DBZ-51 Extractor Bit
(DZ-71)
DR-22 100mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
DR-25 99mm
* DBZ-51~65 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.