PZ-65 Screw Removal Locking Pliers
Hold the screw head and lock it up to twist!!
Vertically serrated jaws bite a stuck screw head while locking it securely.
It helps to optimize your grip strength for twisting off stubborn screws.
Quick release mechanism, just open the handles to unlock the gripping jaws
Rubber handles provide you with a comfortable grip.
PZ-64, PZ-65 & PZ-66 Line-up
Vertical serrations in the center
Grip & remove a stuck screw in seconds
Can be retightened with
a hex key wrench (4mm)
Securely hold different workpieces
The max. round bar sizes that can be held with PZ-64 & PZ-65
Quick release: Just pull
the handles with both hands
Step 1 : Loosen the adjusting bolt.
Step 2 : Adjust the opening jaws with the bolt to fit the diameter of a screw.
Step 3 : Fasten the adjusting bolt further (half a turn to the right)
Step 4 : Squeeze the handles to lock the jaws.
Screw Head Size
Dome (Truss) Head
Round or Pan Head
Screw head: dia. 3 to 9.5㎜ (PZ-64)
Screw head: dia. 3 to 9.5mm (PZ-65)
Screw head: dia. 3 to 5.5mm(PZ-66)
1) The tool may not remove specially-hardened, heat-treated or glued screws.
2) Be sure to apply this tool to a screw head, but not to screw thread.