Home > Products > Screwdrivers > DZ-70 / DZ-71 / DZ-72
DZ-70 / DZ-71 / DZ-72 Go-Through Screwdriver
Ergonomisches Design für kraftvolles Drehmoment
-
⌀10mm iron core penetrates the handle, so the hammer impact can be transmitted directly to the tip.
-
With 13mm Hex. (Across Flats) bolster, works with a wrench to increase the (un)tightening torque.
-
Compatible with 6.35mm (1/4 inch) bits
Features
DZ-70
DURCHGANGSTREIBER (nur Griff)
● Ergonomically designed comfort handle, accepts 6.35mm driver bit (Bit length over 50mm recommended)
● The handle is narrow in the middle to place fingers here for safety, and useful for quick tightening.
Sechskantschlüssel (Schlüsselweite 13 mm)
Der Schlag mit einem Hammer
gut an die Spitze übertragen
Rechteckige Form
Narrow in the middle
Kugelförmiges Ende
DZ-71
DURCHFAHRER
Extractor Bit enthalten:
Press & Twist Typ Bit zum
Kreuzschlitzschraube Nr. 2 entfernen (DBZ-51)
4 Kanten der Kreuzspitze können fest greifen
die verbleibenden Ecken der Phillips-Aussparung.
Target Screws for DBZ-51
Flat & Round Head M3~5
Dome Head M4~5
DZ-72
GO-THROUGH DRIVER
Schraubendreherbit enthalten:
(＋) Schraube Nr. 2
Ähnliche Produkte
■ Set aus DBZ-51, 52, 57 und 58 im Tragekoffer
DBZ-58 #0 Drücken und Drehen
DBZ-57 #1 Drücken und Drehen
DBZ-51 #2 Drücken und Drehen
DBZ-52 #2 Schlagen und Wenden
Funktioniert mit Kreuzschlitzschrauben mit abgenutztem Ende (Größen Nr. 0, Nr. 1 und Nr. 2)
4-in-1 Screw Extractor Set (DBZ-22)
Length 105mm x Hex. 6.35mm
■Set of DBZ-62, 63, 64 & 65 in a carrying case
-
Works with 2~5mm (Across flats) stripped hex socket screws
-
Also useful as an extractor for other screw drives such as Phillips, Torx, etc. as per the following steps ;
(1) Drill a pilot hole in the center of screw head.
(2) Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used).
(3) Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power driver can be also used.
4-in-1-Schraubenausdreher-Satz
(DBZ-20)
Länge 105 mm x Sechskant 6,35 mm
DR-22 100 mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 Extraktoren anbringbar
* Der Bithalter kann auch mit einem Schlagschrauber verwendet werden.
DR-25 99mm
* DBZ-51~65 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.
Spezifikationen
