top of page

Home > Products > Screw Removal > DBZ-440

 DBZ-440  Socket Screw Extractor - 65mm Bits - 

65mm-long Socket Screw Extractors, ideal for work in a limited
space. Hex socket size 4.0mm (Across Flats)
  • Ideal for the extraction of the stripped or broken Hexagon Socket screws and Hex. Hollow Set screws

  • Overall length 65mm 

  • Used manually with 6.35 driver handle or with a power screwdriver

  • Attachable to Extension Bit Holders (Option) 

BUY NOW.jpg
US.jpg
amazon.jpg
DE.jpg
amazon.jpg
JP.jpg
amazon.jpg
Video
Video
Features
Features
Accessible to a screw in the deep hole
dbz400Series_10-2.PNG
Works with Hex. Socket Set Screws.
Combination with other attached parts (Optional)
Screw in the depth of the lengthy hole
Screw in the corner or the wall
Size / Compatible screw
Tip Shape
Spec.
dbz400Series_29-2.png

Power tool

Select Low Speed mode and press
the power screwdriver forward.
When you remove a larger screw
(M6) that requires high torque,
it is recommended to use the
extractor manually instead of a
power tool.

Application to Phillips & other drives

Step 1

Drill a pilot hole in the center of screw head.

Step 2

Apply the tip of the extractor and spin it

counterclockwise.

Select the appropriate size which corresponds to the pilot hole
(the diameter of the drill used).

Approximate cutting depth

Drill diameter

Dig with a drill to
the bottom of
the screw recess.

Excessive drilling
may snap off the
screw head.

CAUTION

Related
Related products

Compatibility Chart of Socket Screw Extractors

Socket Screw Extractor 18mm Bits

(DBZ-310~350)

Choose the bit that fits to your needs_02.jpg

Hex. Screw Extractors
[Strike & Turn type]

for Heavily-damaged Hex. Socket
(DBZ-53/54/56)

dbz50b.jpg

High-torque Handle Grip for DBZ series

(DBZ-50B)
100mm in width

dz70body.jpg

Cross Section

Go-through Driver Handle ø38 x 121(L) mm
with 13mm Hex Bolster
(DZ-70)

DZ-71.jpg

Go-through Driver Handle ø38 x 121(L) mm 
with 13mm Hex Bolster and DBZ-51 Extractor Bit
(DZ-71)

DR-22     100mm

DR-23     150mm

DR-24     190mm

* DBZ-51~65 Extractors attachable
* The bit holder can be used with an Impact Driver, too.

Hex. 6.35.jpg

DR-25     99mm

* DBZ-51~65 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.

bottom of page